Simple Re-breather

DO NOT USE FOR SOLO BONDAGE! 

This hood is 2 pieces that cover the whole head and includes an extra air reservoir “pouch” area over the nose & mouth. The hood has a reinforced 3/8" hole in the front to allow for the wearer of the mask to breathe slow, smooth, deep breaths. One center seam that goes down the center of the face.

A length of rigid tube can be offered to keep the breathing hole accessible, leave a request in the order notes.

The fit on the Simple Re-breather is relaxed compared to our Tailored Re-breather. The Simple Re-breather is less formed and less rigid in structure whereas the Tailored Re-breather is designed to hug the back and sides of the head keeping the pocket of air at the front of the hood. 

Measure your head with the hairstyle you are going to wear with the hood. Thick hair may change your size. If you are between sizes, size up, or customize. 

Sizing:

• Small: 20” - 21” around forehead at eyebrows (13” - 14” neck)
• Medium: 21” - 22” around forehead at eyebrows (14” - 15” neck)
• Large: 22” - 23” around forehead at eyebrows (15” - 17” neck)
• X-Large: 24” - 25” around forehead at eyebrows (17” - 18” neck)
• Custom: We will get extra measurements after purchase to make sure the hood fits you. This adds 2 weeks to the standard turn around time.

Closure options limited to pull-on.

About our chlorination: We've developed a unique 2-step chlorination process that locks a high shine coating onto the surface, unlike most chlorination that can leave garments dull and somewhat patchy. 

For a better representation of colours check out our Radical Rubber (for translucent colours) or Supatex colours