Kink Engineering

The Skyscraper: VacTower


Create Wishlist



Total immersion Vac-Tower! 1 meter by 1 meter base, stands almost 2 meters tall (39" x 39" x 75")

The Skyscraper allows you to not only immobilise your play partner, but keep them standing upright - completely enclosed in latex! The Skyscraper holds you securely and completely and is air
tight so you don't have to run the vacuum all the time.

This Skyscraper only comes with a breathing tube - for an upright total enclosure like we've never before offered! It's stable, but should always have a spotter to make sure that it
does not tip over as people inside are immobilised and can't step to balance themselves if the should start to tip for some reason.

Note: This tower does not include sexy naked ladies... however, the breathing tube can easily be modified to accommodate two or more!

This comes with a partial frame: We send you all the special corner parts needed to build the frame, you only need to cut some PVC tubing and drill some holes for air flow
(Instructions included) or a fully finished frame. As the pipes are so long, by not shipping the frame parts that are easy to make for yourself we can cut down on cost of shipping.
However, if you don't have the time or resources we will happily build all the parts of your frame and ship it all to you. Just make sure to chose YES! For the frame option.

The Vac-tower comes with:

  • Latex bag
  • Your choice of one or long breathing tubes
  • Closure bar (seals bed airtight for play)
  • Kink Engineering's special one way valve
  • Instructions to build and/or assemble the frame
  • A+ customer service willing to help you out with any tips or queries you may have

These are custom built to order, so please expect 4-6 weeks turnaround time.

Colour 1 = Top, Bottom,Front and Back of Tower
Colour 2 = Left and Right side panels of Tower

***PLEASE NOTE:Some options may change the price of your order

SKU: vacbed-skyscraper


5 out of 5 (based on 1 rating)
leave a review

Vac tower

The tower itself was well constructed. But I had to file sharp edges and burs off the quick release clamp so it would be safe. Also the tube breathing option proved unreliable, repeatedly had to quick release the occupants as one or both would loose the ability to breath. Ended up using an adapter to secure the hose to a cpap face mask for consistent reliable breathing of occupants.
Posted by David , Dec 24th 2019